Orlando Garage Door Services
1(407) 788-1229
Volusia Garage Door Services
1(386) 236-9100
1(407) 788-1229
1(386) 236-9100
Wondering how much it costs to replace a garage door spring? You’re not alone—lots of homeowners ask the same question. At Emerald Garage Door Services, we break it down so you know whether it’s a smart investment.
A few factors will swing the final price. Here’s a ballpark figure and a closer look at what makes the number go up or down.
Torsion springs go above the door and twist to lift the weight. Because of that, they’re the stronger, longer-lasting option. This type can usually handle 8 to 15 years of door lifting, yet they come with a higher replacement cost.
For the springs themselves, parts can range from 60to60to200. When a pro installs them, the price jumps to about $350 total, depending on the installation specifics. Brand and quality of spring affect the final figure.
Extension springs sit on the side tracks of the door. They stretch and squeeze to raise the panel. They cost less, yet they’re the shorter-life spring, averaging 7 to 12 years.
An extension spring unit is about 30to30to90. Add in labor, and you’ll pay about 150to150to200 when the job is done. Prices will shift with the spring’s brand, the labor quality, and possible extra repairs.
Hit the door spring costs and budget first, then contact a lift tech. We’ll next highlight items that raise spring replacement bills.
Replacing garage door springs can vary in price, and understanding the main factors can help you budget for the job.
The type of spring set on your door is usually the largest price driver. Torsion springs, which handle the weight of heavy garage doors, simply cost more than their lighter door counterparts—extension springs. The better your door carries its weight, the more you can expect to pay.
The size and design of the door you own also impact the price. Tilt-up doors, with their simpler design, are generally quicker to service; the labor is easier and the cost is lower. Roll-up doors, however, contain more parts and require more time to handle the springs and their safety systems. Expect the labor charge to reflect that added complexity.
When the job actually starts, technicians may find parts that need attention. Tracks that are bent, rollers that are worn, or worn-out bearing plates can trip you into additional costs. The more of these small repairs you need, the taller the invoice becomes.
A single spring set is common, but some doors use two or more to balance the weight. Each additional spring multiplies costs, so it pays to factor that in upfront. Also, springs come in budget and premium grades. Spending modestly saves now, but the installer may recommend premium springs for longer life, truthfully shifting a larger dollar figure to you today but saving you money on future repairs.
Local prices for everyday stuff can affect how much home insurance replacement coverage you need. In neighborhoods where groceries, rent, power, and daycare cost more, builders and repair pros tend to charge higher for service. This higher labor cost gets rolled into replacement estimates, pushing the total coverage figure up for home insurance, even if the roof design or wall material didn’t change.
Replacing garage door springs isn’t a one-size-fits-all job. The total cost can change a lot depending on what kind of door you have. Roll-up doors typically run between $200 and $350. Tilt-up doors are a bit cheaper—expect to pay between $150 and $200.
Roll-up doors generally have torsion springs. They’re tough and can handle plenty of use, usually lasting 8 to 15 years. That adds to the cost. Tilt-up doors go with extension springs, which are lighter-duty. They’re cheaper upfront, but you’ll need them replaced every 7 to 12 years.
The price you see includes both the springs themselves and the cost of a technician to put them in. Keep in mind that your geographic area and the specific setup of your door can cause the figure to slide a little higher or lower.
Regardless of the door you have, it’s a smart idea to call a pro for spring replacements. Garage door springs are under a lot of tension; trying to change them yourself can result in serious injuries or damage.
To sum it all up: the typical cost of replacing garage door springs will fall between $150 and $350. If you have a roll-up door with torsion springs, the job is pricier. Tilt-up doors with extension springs cost noticeably less.
When garage door springs get swapped out, homeowners often run into other fixes. Simple tasks like leveling the door, adding lubricant, or tweaking the spring pull might pop up. Each step helps keep the door safe and operating smoothly.
A regular maintenance check—called a tune-up—can really pay off. It spots little glitches before they snowball into big bills. You can usually book a tune-up for $40 and $80.
Sometimes the door cables need a swap too. Frayed cables can lead to jerky movement and, worse, a safety risk. Replacing a set of cables costs $80 and $185 on average.
If both springs and cables are shot, you’re looking at a total of $200 to $500 for the complete work. The final price varies, based on the type of springs, the door’s size, and the labor involved.
Many garage door repair pros run special offers when you bundle fixes, so be sure to ask. Taking care of the extra adjustments at the same time as the springs makes sure the door stays dependable for years to come.
If a broken garage door spring has you staring at a rising repair bill, you’re not alone—yet you can limit expenses without skimping on safety. Use these smart tips and you’ll keep your budget happy.
Before you splash cash on new springs, double-check the actual issue. Sometimes a sticky track or a worn garage door opener can mimic spring failure. A short diagnostic test on your part may save you from patting your wallet for parts you don’t truly need.
Tempted by a cut-rate repair? Hold the brake. Seasoned pros—whose hands already understand the exact spring type your door uses—will finish the job faster and fewer surprises will rocket the price up. Your monthly budget deserves to steer clear of counterfeit heroes working from shaky guides.
Don’t wait for trouble to strike. Have your springs, cables, and rollers inspected yearly. A nominal maintenance fee now can uncover small faults—delaying the sudden, expensive all-at-once replacement.
Every few months, spend a few minutes lubricating the springs your garage door springs and checking for rust or wear. A quick grease and a tightening here and there can keep them swinging smoothly and add years to their lifespan. That means you dodge the worry—and surprise bill—of a broken spring before spring really breaks.
Budget options can feel tempting, but a subpar spring can wear out in a fraction of the time. Choose a brand you can trust, even if the price tag is a little higher. That one-time smarter buy means the headache of repeated spring changes—and their cost—gets wiped off your future to-do list.
Before you decide, call at least three garage door pros for written estimates. Look for transparent pricing, solid warranties, and glowing offline service reviews. Shopping the price and backing can save you on the install and—if their service is solid—keep future issues small.
These three simple moves can keep your springs in good shape and your wallet even better. A properly scheduled spring, spring, and a skilled service means your garage door stays safe and functional—without the ugly surprise of an unexpected bill.
Swapping out your garage door springs is important for safety, but it can bite into your budget. Expect to pay between $150 to $350, depending on the spring type and your door setup. Even though DIY videos look simple, it’s smarter and safer to get a pro to handle it.
Keep the springs happy by following our tips. Good upkeep and the right spring will squeeze every extra year out of them. Always grab a few quotes from companies with solid reviews—this keeps costs down without cutting corners on quality.
Forking out cash for new springs is a smart investment that keeps your garage door safe and operating smoothly. Knowing the price range and the factors that swing it lets you budget smarter and schedule service when needed. Armed with this info, you can care for your garage door with confidence.
Prices for garage door spring replacement can differ. The model of the garage door you own is a big part of the total cost, but other details in the job can also affect the number you see on the invoice.
Different parts of the replacement job can optimize—or raise—the cost. The spring type and the door model usually drive the pricing, yet your zip code, the labor market in your area, and possible extra repairs or adjustments also influence the final amount you pay.
You’ll see two major spring types on the market. First, torsion springs, which can cost between $60 and $200 for each part; labor for these is able to climb up to $350.Second, extension springs usually retail for 350. Second, extension springs usually retail for $30 to $90 for the part, with labor cost closer to $150 to $200.
Roll-up garage doors usually rack up the highest costs, priced between $200 and $350 for a spring switch. A tilt-up door, on the other hand, is more standard and costs $150 to $200 to have the springs replaced.
When you swap garage door springs, you sometimes uncover hidden repairs. A garage door tune-up, which includes balancing and adjusting the system, usually costs $40 to $80. If the lifting cables show wear, replacing them runs $80 to $185. A bit of oil on the rollers and hinges is also a common add-on.
To trim expenses, start by confirming the springs really need changing. Inspect them for visible gaps or rust. Schedule regular maintenance so the door stays in top shape. Use quality, branded springs and compare prices between at least three reputable contractors. Some offer seasonal discounts, so ask.