DIY vs Call a Professional: A Comprehensive Guide to Garage Door Repair

Common Garage Door Repair Problems and Their Causes

A. Broken or Damaged Springs
A broken or damaged spring is one of the most common garage door repair issues. Garage door springs counterbalance the door’s weight, allowing it to open and close smoothly. If a spring breaks or loses tension, the door may become too heavy to lift or may slam shut suddenly. This can be caused by normal wear and tear, rust, or extreme temperature changes.

B. Misaligned or Damaged Tracks
Garage doors run along tracks on either side, which guide them as they open and close. If the tracks are misaligned or damaged, the door may not open or close smoothly or may even become stuck. Misaligned tracks can result from accidental impact, improper installation, or loose hardware.

C. Worn or Broken Rollers
Rollers are the small wheels that allow the garage door to move along the tracks. If these rollers become worn or damaged, the door may become noisy or difficult to open and close. Rollers can wear out over time or become damaged by debris or misaligned tracks.

D. Malfunctioning Garage Door Opener
A garage door opener is a motorized device that controls the opening and closing of your garage door. If your garage door opener is not working correctly, the door may not open or close or operate intermittently. Electrical issues, worn-out gears, or problems with the remote control or sensors can cause this.

DIY Solutions for Common Garage Door Problems

A. Broken or Damaged Springs
If you suspect a broken or damaged spring, it’s crucial to exercise caution. Garage door springs are under high tension and can cause serious injury if improperly handled. If you’re comfortable with DIY repairs and have the necessary tools, you can replace the springs yourself. However, it’s best to call a professional if you need more clarification or the proper tools.

B. Misaligned or Damaged Tracks
To fix misaligned tracks, loosen the brackets’ bolts and gently tap the track into the correct position with a rubber mallet. Be sure to use a level to ensure the track is aligned correctly. If the
tracks are severely damaged, it’s best to call a professional for a replacement.

C. Worn or Broken Rollers
Replacing worn or damaged rollers is a relatively simple DIY task. Start by releasing the tension on the garage door by disconnecting the opener and carefully lowering the door. Remove the old roller by gently bending the track with a pair of pliers and sliding the roller out. Insert the new roller and bend the track back into place. Repeat this process for each roller that needs replacement.

D. Malfunctioning Garage Door Opener

Before attempting any repairs on the garage door opener:

• Make sure the problem isn’t with the remote control or sensors
• Replace the batteries in the remote and ensure the sensors are clean and properly aligned.
• If the issue persists, consult your garage door repair opener’s manual for troubleshooting tips or call a professional for assistance.

When to Call a Professional

While some garage door repairs can be done on your own, there are times when it’s best to call a professional. If you need help with proceeding, lack the necessary tools or experience, or if the problem involves high-tension components like springs, it’s best to call a professional for assistance. Additionally, if you’ve attempted a DIY garage door repair and the issue persists or worsens, it’s time to consult an expert.

Here are some specific situations when you should call a professional:

A. Torsion Spring Replacement: Torsion springs are under extreme tension, and replacing them can be dangerous for inexperienced individuals. It’s best to leave this garage door repair to a trained professional.

B. Major Track Damage: If your garage door tracks are severely bent or damaged, a professional will have the necessary tools and experience to replace them safely and effectively.

C. Electrical Issues: If you suspect an electrical problem with your garage door opener or wiring, it’s essential to call a professional to avoid the risk of electrocution or further damage.

D. Recurring or Complex Issues: If you’ve tried DIY garage door repair solutions but continue to experience problems, a professional can diagnose and address the underlying issue, saving you time and frustration.

Tips for Maintaining Your Garage Door

Proper maintenance can help prevent many garage door repair issues and prolong the life of your door. Here are some tips to keep your garage door in top condition:

A. Regularly Inspect and Lubricate: Inspect your garage door’s components, including springs, cables, rollers, and tracks, for signs of wear or damage. Lubricate moving parts with a high-quality silicone or lithium-based spray to keep them operating smoothly.

B. Keep Tracks Clean: Remove debris and dirt from the tracks to prevent roller damage and ensure smooth operation.

C. Tighten Loose Hardware: Check and tighten any loose bolts or screws on the door and tracks. Over time, vibration from the door’s operation can cause hardware to loosen.

D. Test the Door Balance: Disconnect the garage door opener and manually lift the door halfway. If it doesn’t stay in place or is difficult to lift, the springs may need adjustment or replacement. This is best done by a professional.

E. Test Safety Features: Regularly test the auto-reverse feature on your garage door opener by placing an object, like a broom or a piece of wood, on the ground in the door’s path. The door should reverse automatically when it comes into contact with the object. If it doesn’t, consult your owner’s manual for troubleshooting tips or call a professional for assistance.

A well-functioning garage door is essential for the security, insulation and convenience of your home. By understanding common garage door repair problems and their causes, you can tackle simple DIY repairs and know when to call a professional. Regular maintenance can help prevent issues and prolong the life of your garage door, ensuring its smooth operation for years to come.